|
HIGH POWER. COMBI 350 is the marble, brick and stone saw. Complete, highly versatile, it is the ideal machine for both building sites and tile installers. In fact, Combi 350 allows two ways of working: with cutting head moving forwards or with plunge cutting.
 AUTOMATIC DRIVE BELT TENSIONER
Thanks to the high strength POLY-V drive belt and the automatic belt tensioner, the 2.2 kW motor transmits its power to the blade completely.
POLYPROPYLENE WATER TRAY
The polypropylene water tray is highly resistant to wear, lightweight and easy to clean. The special shape of the tray separates debris from the water recovery section of the pump.
MILLIMETRE STOP
IP PLUG 67
ELECTRIC WATER PUMP WITH VALVE
Water recovery takes place through an electric pump. Constant water flow, adjustable through the valve, improves blade cooling and cleaning, increases blade life and optimises cutting operations.
CARRYING HANDLES
STAINLESS STEEL CUTTING SURFACE
PROTRACTOR
SPLASH GUARD
IP55 CIRCUIT BREAKER WITH MINIMUM VOLTAGE COIL
HIGH CUTTING CAPACITY
Combi 350 is available in two versions, with 600 mm and 1000 mm cutting surface, to better meet working requirements.
MOST ACCURATE CUTTING
Combi 1000 guarantees high cutting precision, a tolerance of approx. 5/10 for a length of 1 m. The cutting head glides thanks to eight rollers mounted on sixteen sealed ball bearings. The 3 mm thick steel travel bar requires no lubrication and ensures high resistance to load distortion and torsional stress.
45° CUTTING
45° cuts are made in app. 5 seconds by tilting the cutting head over, without the need of optional tools and accessories. The cutting head holders can be clamped in the 90° or 45° position for greater stability and cutting precision.
TILTING CUTTING HEAD
The tilting cutting head speeds up special cutting jobs such as grooving, profiling and cutouts. Compared to conventional machines with crank adjustment, the tilting cutting head can be clamped at the desired height or left unclamped for plunge cuts without cutting head advancement.
WATER TRAY
The shatter resistant thermoformed plastic water tray is lightweight but very resistant. Its large shape allows water recovery from the pump and also offers a stable support.
ADJUSTABLE LEGS
The legs slide up and are housed inside the frame to reduce height and overall dimensions for transport or storage. The handles facilitate transport and handling. An optional wheel kit is also available for handling the machine by only one person.
WHEEL KIT OPTIONAL
RECOMMENDED BLADES
The machine is designed for continuous rim blades or sector blades with slots (distance between two sectors) less than 5 mm. To obtain peak performance, the use of IMER diamond blades is recommended.
|
