|
HIGH CUTTING LENGTH. COMBI 3000 is the stone workshop and large job site saw, for finishing marble/granite slabs to be used as building facings. Compared with stationary workshop machines, it is lightweight and compact.
  STAINLESS STEEL CUTTING SURFACE
TWO-WAY AUTOMATIC TRAVEL
Cutting head advancement is possible through a gear motor. Manual or automatic travel can be selected by a switch on the control panel.
ADJUSTABLE CUTTING SPEED
Cutting advancement speed can be adjusted by checking motor power absorption during the cutting operation. The value is indicated by the ammeter on the control panel.
UTMOST RELIABILITY AND STURDINESS
The cutting head glides thanks to eight rollers mounted on sixteen sealed ball bearings. The 3 mm thick steel travel bar requires no lubrication and ensures high resistance to load distortion and torsional stress.
45° CUTTING
45° cuts are made by tilting the cutting head, without the need of optional tools and accessories. The lifting system is power assisted to reduce operator effort.
PROTRACTOR
ELECTRIC SAFETY DEVICE FOR TRAVELLING HEAD
ELECTRIC WATER PUMP
TILTING CUTTING HEAD
The tilting cutting head speeds up special cutting jobs such as grooving, profiling and cutouts. Compared to conventional machines with crank adjustment, the tilting cutting head can be clamped at the desired height or left unclamped for plunge cuts without carriage advancement.
WATER TRAY WITH ELECTRIC WATER PUMP
The 100 l polypropylene water tray is highly resistant to wear and easy to handle thanks to the castors. The electric water pump with 25 l/min. Flow rate ensures constant water flow to the blade.
COMPLETE CONTROL BOARD
The control board includes:
- general switch
- ammeter
- electronic protection against overload
- power indicator
- emergency push-button
- cycle selector
- potentiometer
- net start
- electric water-pump starting selector
- operator group starting/switching off
- plug IP 67
AUTOMATIC DRIVE BELT TENSIONER
Thanks to the high strength POLY-V drive belt and the automatic belt tensioner, the 2.2 kW motor transmits its power to the blade completely.
OPTIONAL WORK TABLE
The additional work table (optional) is a solid support for cutting large slabs.
ADJUSTABLE LEGS
The legs slide up and are housed inside the frame to reduce height and overall dimensions for transport or storage. The frame is provided with two hoisting slots for fork lifting.
|
