|
Flexibility and simplicity are the main features of the new portable water-cooled diamond blade saw for cutting ceramic, masonry, bricks and stone. Light and compact, the Combi 250 VA guarantees maximum cutting precision thanks to its ergonomic structure and a range of accessories. This unit is also available with a 1000mm bed - contact us for further details
  PROTRACTOR (CUTTING GUIDE)
The protractor enables the positioning of large (up to 600 mm) and very small (up to 10 mm) pieces.
TOTAL PROTECTION FROM CORROSION
All parts in direct contact with water are made from anodised extruded or pressure diecast aluminium subjected to anti corrosion treatments.
UTMOST RELIABILITY AND STRENGTH
The gliding elements of the cutting head consist of wheels mounted on sealed ball bearings. With this system gliding is effortless and cutting operations are most accurate. The cutting unit, made from diecast aluminium and the extruded aluminium beam optimise operation, reducing maintenance and ensuring precision when working complete with  Ø 250 MM DIAMOND BLADE FOR CERAMIC TILES AND STAND
ANODISED EXTRUDED ALUMINIUM CUTTING SURFACE
IP 67 PLUG
SHATTER RESISTANT PLASTIC WATER TRAY
IP 55 SWITCH
ELECTRICAL SYSTEM PROTECTED AGAINST ACCIDENTAL STARTS AND OVERLOADS
EXCELLENT CUTTING LENGTH (785 mm)
HIGH CUTTING CAPACITY
The diamond blade (suitable for all types of materials) is driven lengthwise by a mechanism comprised of an aluminium cutting unit that glides along an aluminium beam. Gliding is achieved by means of 8 PVC wheels mounted on 16 ball bearings, while the blade displacement is done manually by the operator. During cutting operations, the blade can be placed vertically (90°) with respect to the cutting surface or tilted between 90° and 45°. Depth adjustment is maintained in any position. The maximum cutting length of 785 mm allows diagonal cutting of a tile with 500 mm side.
CUTTING WITHOUT CHIPPING
The blade plunges from above, thus reducing drastically, if not eliminating chipping on the cutting surface.
90° VERTICAL CUTTING
The blade support mechanism allows the vertical positioning of the blade so that the maximum cutting depth of 105 mm can be obtained by two cutting passes. With the blade placed vertically (90°), a cutting depth of 66 mm is obtained in one single cutting passage.
45° CUTTING
Tilting the cutting head at 45° takes less than 10 seconds without optional tools/accessories.
DIRECT TRANSMISSION
The blade is driven directly by the motor.
WATER PUMP
Continuous water flow to the blade takes place through an electric pump and can be adjusted through the valve, ensuring blade cooling and optimising cutting operations. The water pump can be easily inspected.
ADJUSTABLE FENCES
RECOMMENDED BLADES
The machine is designed for continuous rim blades or segmented blades. In addition to the continuous rim blade for ceramic tiles, also available are segmented-rim blades for cutting bricks/masonry, sector blades for granite, sector blades for cement/roof tiles and sandstone and continuous rim blades for porcelain, stoneware with porcelain finish.
STAND DIMENSIONS
length/width/height: mm 1060/545/750. weight: kg 8,8, BRACKET FOR CUTTING SURFACE: kg 0,7
OPTIONAL SIDE CUTTING SURFACE
extends the cutting surface by 240 mm. easily mounted and supported by a bracket bolted onto the stand
(weight of the cutting surface: 2.6 kg / with packing 4.5 kg)
|
