THE SCAFFOLD ATTACHMENT
ensures the correct mounting of the hoist on the scaffold. In comparison to the clamps attachment, the use of this accessory reduces the stress transmitted to the scaffold by spreading the load over a larger area. The scaffold attachment for hoists is also fitted with a pre-aligned-plate for locking the work positioning lever.

 INTERNAL ADJUSTABLE PROP
allows to use a hoist indoors or where external scaffolding structures are not present. Simple and quick to mount, the height of the prop can be adjusted from a min. 2,45 m to a max. of 3,3 m facilitating adaptation to most different locations. The height of the support is adjustable to enable operating through window.

 THE WINDOW PROP
is an attachment designed for the small job-site or refurbishment work where the work area cannot be obstructed. Using the hoist applied on the window prop leaves the whole working area completely free. Mounting the window prop is carried out in an easy and quick way without using any special tools.

WITH FIXED FRAME HOIST AND
SWIVELING EXTENSION.

 EXTERNAL PROP
allows the hoist to be mounted outdoors where overhanging support points are not available.
The external prop consists of two separate units: an internal prop and conversion kit with ballast.
The prop has limited dimensions and can be dismantled for storage and transportation.

CONNECTED TO AN EXTENDIBLE BRACKET HOIST

SWIVELING EXTENSION
FOR PROP CLAMPS ATTACHMENT
WITH WORK POSITIONING
LEVER

BUCKET CARRIER

SWIVELING EXTENSION
FOR PROP HOIST ATTACHMENT
WITH WORK POSITIONING
LEVER

SCAFFOLD FRAMES LIFTING HOOK

TROLLEY FOR HOIST

WEDGE-SHAPED BUCKET